Suction Feed

ATOMEX Industrial Series Suction Feed Spray Guns deliver quality finishes for automotive, furniture and industrial spray applications that is commonly only found in guns costing twice the price.

Free Next Day Delivery Anywhere in Australia

MasterCard and Visa Welcome - No Surcharge

Models

ATOMEX Industrial Series Suction Spray Gun with 1.2mm Nozzle

Order Code AX/14-SP-200S-12

Type: Suction Pot - 1000ml
Fluid Tip: 1.2mm
Atomising Pressure: 35-65 psi
Air Consumption: 270 l/min
Fluid Out Put: 140 ml/min
Max Pattern Width: 175mm
Compressor: 12-15 cfm
Suitable for: 2 Pack Topcoat, Enamel and Polyurethane

ATOMEX Industrial Series Suction Spray Gun with 1.4mm Nozzle

Order Code AX/14-SP-200S-14

Type: Suction Pot - 1000ml
Fluid Tip: 1.4mm
Atomising Pressure: 35-65 psi
Air Consumption: 270 l/min
Fluid Out Put: 180 ml/min
Max Pattern Width: 255mm
Compressor: 12-15 cfm
Suitable for: 2 Pack Topcoat, Enamel and Polyurethane

ATOMEX Industrial Series Suction Spray Gun with 1.8mm Nozzle

Order Code AX/14-SP-200S-18

Type: Suction Pot - 1000ml
Fluid Tip: 1.8mm
Atomising Pressure: 35-65 psi
Air Consumption: 290 l/min
Fluid Out Put: 400 ml/min
Max Pattern Width: 260mm
Compressor: 12-15 cfm
Suitable for: Primer Filler, Enamel and Furniture Lacquer

ATOMEX Industrial Series Suction Spray Gun with 2.0mm Nozzle

Order Code AX/14-SP-200S-20

Type: Suction Pot - 1000ml
Fluid Tip: 2.0mm
Atomising Pressure: 35-65 psi
Air Consumption: 290 l/min
Fluid Out Put: 440 ml/min
Max Pattern Width: 260mm
Compressor: 12-15 cfm
Suitable for: Primer Filler, Enamel and Furniture Lacquer

ATOMEX Industrial Series Suction Spray Gun with 2.5mm Nozzle

Order Code AX/14-SP-200S-25

Type: Suction Pot - 1000ml
Fluid Tip: 2.5mm
Atomising Pressure: 35-65 psi
Air Consumption: 290 l/min
Fluid Out Put: 490 ml/min
Max Pattern Width: 290mm
Compressor: 12-15 cfm
Suitable for: Primer Filler, Undercoat and Spray Putty

Stainless steel needle & nozzle. Special 8 hole air cap. New design dust free air cap. Compact ergonomic design. Full parts backup.

Supplied with a pot unless otherwise noted and a universal gun spanner, parts list, cleaning brush and a Nitto syle hi-cupla fitting.

Provides a fine finish ideal for quality top coat applications. These guns are the best choice for conventional spraying for quality finishes.

Star SP2000 - Suction Spray Gun with 1.5mm Nozzle

• Type: Suction
• Fluid Tip: 1.5mm
• Atomising Pressure: 50 psi
• Air Consumption: 306 l/min
• Fluid Out Put: 220 ml/min
• Max Pattern Width: 245mm
• Compressor: 8-12 cfm
• Suitable for: 2 Pack Basecoat, Fine Finish Top Coat, Enamel and Polyurethane

Star SP2000 - Suction Spray Gun with 1.8mm Nozzle

• Type: Suction
• Fluid Tip: 1.8mm
• Atomising Pressure: 50 psi
• Air Consumption: 314 l/min
• Fluid Out Put: 280 ml/min
• Max Pattern Width: 260mm
• Compressor: 12-15 cfm
• Suitable for: Enamel and Acrylic Lacquer

Star SP2000 - Suction Spray Gun with 2.0mm Nozzle

• Type: Suction
• Fluid Tip: 2.0mm
• Atomising Pressure: 50 psi
• Air Consumption: 323 l/min
• Fluid Out Put: 325 ml/min
• Max Pattern Width: 270mm
• Compressor: 12-15 cfm
• Suitable for: Acrylic lacquer, Furniture Lacquer, Metallic, Primer and Industrial Enamel

Stainless steel needle and nozzle. New design dust free air cap. Compact ergonomic design. Full parts backup.

General Purpose gun suitable for a wide range of sprayable products including paint and industrial coatings.

Supplied with a pot unless otherwise noted and a universal gun spanner, parts list, cleaning brush and a Nitto syle hi-cupla fitting.

Star SG1000 - Suction Spray Gun with 1.3mm Nozzle

Type: Suction
Fluid Tip: 1.3mm
Atomising Pressure: 45 psi
Air Consumption: 170 l/min
Fluid Out Put: 160 ml/min
Max Pattern Width: 195mm
Compressor: 6-8 cfm
Suitable for: 2 Pack Topcoat, Enamel and Polyurethane

Star SG1000 - Suction Spray Gun with 1.5mm Nozzle

Type: Suction
Fluid Tip: 1.5mm
Atomising Pressure: 45 psi
Air Consumption: 181 l/min
Fluid Out Put: 170 ml/min
Max Pattern Width: 200mm
Compressor: 6-10 cfm
Suitable for: 2 Pack Basecoat, Enamel and Acrylic Lacquer

Star SG1000 - Suction Spray Gun with 1.8mm Nozzle

Type: Suction
Fluid Tip: 1.8mm
Atomising Pressure: 45 psi
Air Consumption: 201 l/min
Fluid Out Put: 200 ml/min
Max Pattern Width: 210mm
Compressor: 6-12 cfm
Suitable for: Acrylic Lacquer, Furniture Lacquer, Industrial Enamel and Primer

Free Next Day Delivery Within Australia

Mastercard and Visa Accepted with No Surcharge

High Volume Low Pressure HVLP spray painting technology providing high transfer efficency of product which may achieve significant reductions in overspray, coatings loss and pollution.

Supplied with a pot unless otherwise noted and a universal gun spanner, parts list, cleaning brush and a Nitto syle hi-cupla fitting.

All HVLP air spray guns are supplied with a seperate air regulator.

Star SV1000 - Suction Spray Gun with 1.5mm Nozzle

• Type: HVLP Suction
• Fluid Tip: 1.5mm
• Atomising Pressure: 41- 44 psi
• Air Consumption: 209 l/min
• Fluid Out Put: 115 ml/min
• Max Pattern Width: 180mm
• Compressor: 6-10 cfm
• Suitable for: Two Pack Basecoat, Enamel, Acrylic Lacquer

Star SV1000 - Suction Spray Gun with 1.8mm Nozzle

• Type: Suction
• Fluid Tip: 1.8mm
• Atomising Pressure: 42-44 psi
• Air Consumption: 218 l/min
• Fluid Out Put: 130 ml/min
• Max Pattern Width: 200mm
• Compressor: 6-12 cfm
• Suitable for: Acrylic Lacquer, Furniture Lacquer, Industrial Enamel and Primer

Free Next Day Delivery Within Australia

Mastercard and Visa Accepted with No Surcharge

The Star S-770 is a full size conventional suction feed spray gun with a stainless steel needle and nozzle and adjustable fan control.

Star suction feed S-770 spray guns are supplied with a 1 litre suction pot unless otherwise noted and a universal gun spanner, parts list, cleaning brush and a Nitto syle hi-cupla fitting.

The S-770P is a professional air spray gun suited for larger spraying areas.

Model S770-1 1.5 mm Nozzle

• Type: Suction
• Fluid Tip: 1.5mm
• Atomising Pressure: 50-64 psi
• Air Consumption: 195 l/min
• Fluid Out Put: 255 ml/min
• Max Pattern Width: 260mm
• Compressor: 8-12 cfm
• Suitable for: 2 Pak Enamel, Polyurethane and Basecoat

Model S770-2 1.7 mm Nozzle

• Type: Suction
• Fluid Tip: 1.7mm
• Atomising Pressure: 50-64 psi
• Air Consumption: 220 l/min
• Fluid Out Put: 285 ml/min
• Max Pattern Width: 250mm
• Compressor: 12-15 cfm
• Suitable for: Polyurethane, 2 Pak and Enamel

Model S770-3 2.0 mm Nozzle

• Type: Suction
• Fluid Tip: 2.0mm
• Atomising Pressure: 50-64 psi
• Air Consumption: 250 l/min
• Fluid Out Put: 340 ml/min
• Max Pattern Width: 260mm
• Compressor: 12-15 cfm
• Suitable for: Acrylic, Industrial Enamel, Undercoat, Glue, Metallic

Model S770-4 2.5 mm Nozzle

• Type: Suction
• Fluid Tip: 2.5mm
• Atomising Pressure: 50-64 psi
• Air Consumption: 330 l/min
• Fluid Out Put: 435 ml/min
• Max Pattern Width: 275mm
• Compressor: 12-15 cfm
• Suitable for: Lacquer, Primer, Fillers, Industrial Enamel

Model S770-5 3.0 mm Nozzle

• Type: Suction
• Fluid Tip: 3.0mm
• Atomising Pressure: 50-64 psi
• Max Pattern Width: 290mm
• Compressor: 12-17 cfm
• Suitable for: Zinc Base Primers, Spray Putty

Free Next Day Delivery Within Australia

Mastercard and Visa Accepted with No Surcharge

Prices include 1 litre suction pot

Choose your required gun size from the selection box below